- Multi-function Tool
- Car Diagnostic Tool
- Truck Diagnostic
- Mileage Resetter
- ECU Chip Tunning
- OBD2 Code Scanner
- Diagnostic Software
- Popular Garage Tools
- Car Key Programmer
- Car DVD
- Car GPS
- HID Xenon Kits
- Motorcycle Scanner
- Consumer Electronics
- Car Eletronics
- Airbag Reset Tool
- Locksmith Tool
- Auto Parts
- Transponder Key & Chip
- Oscilloscope
Product Description
1) increased the adjustable capacitor, can transfer more flat square wave.
2) 1Msps -> 2Msps Sampling rate (Note: Supporting firmware is being developed)
3) 510Mah -> 700Mah 3.7V Chargeable Lithium Battery.
4) 2hrs hours battery operation -> over 2.5 Hours.
Features:
Display: 2.8" Color TFT LCD
Display Resolution:320*240
Display Color: 65K
Analog bandwidth: 0 - 1MHz
Max sample rate:1Msps 12Bits (With the supporting firmware, max sample rate is 2Msps)
Sample memory depth: 4096 Point
Horizontal sensitivity: 1uS/Div ~ 10S/Div (1-2-5 Step)
Horizontal position: adjustable with indicator
Vertical sensitivity: 10mV/Div ~ 10V/Div (with x1 probe)
0.5V/Div ~ 10V/Div (with x10 probe)
Vertical position: adjustable with indicator
Input impedance: >500kilo-ohm
Max input voltage: 80Vpp (by x1 probe)
Coupling: DC
Trig modes: Auto, Norma, Single, None and Scan
Functionalities: Automatic measurement: frequency, cycle, duty,
Vpp, Vram, Vavg and DC voltage
Precise vertical measurement with markers
Precise horizontal measurement with markers
Rising/falling edge trigger
Trig level adjustable with indicator
Trig sensitivity adjustable with indicator
Hold/run feature
Test signal:Built-in 10Hz ~ 1MHz (1-2-5 Step)
Waveform storage: SD card (maximum supporting storage is 2GB)
PC connection: Mini USB B-Type
PC connection via USB: as SD card reader
Upgrade: by bootloader via USB
Power supply: 3.7V Chargeable Lithium battery / USB
Dimension (w/o probe): 106mm X 55mm X 9.9mm